DFB (Distributed Feedback) LD
- Single Transverse Mode
- Single-frequency Mode
- Mode-hop-free Operation
技术概要
Transverse single-mode semiconductor laser in which a grating pattern is built near the active layer inside the laser chip along the waveguide direction. It enables single-frequency laser oscillation. It is useful for applications requiring narrow spectral linewidths, such as interferometric metrology and Raman spectroscopy. Various wavelengths can also be achieved by customizing the grating period and the gain bandwidth of the active layer.
规格示例1
Specification
| Items | Symbol | Spec (Typ.)* | Unit |
|---|---|---|---|
| Peak Wavelength | λd | 460-470 | nm |
| Optical Output Power | Po | 20~50 | mW |
| Forward Current | IF | 200 | mA |
| Forward Voltage | VF | 5.0 | V |
| Beam Divergence** | Parallel (θ∥) | 9.0 | ° |
| Perpendicular (θ⊥) | 22.3 | ° | |
| Transverse Mode | - | TEM00 | - |
| Spectral Linewidth | Δf | <20 | MHz |
*Po=50mW, Tc=25°C, CW
**Full angle at 50% from peak intensity
Emission Spectrum
The graph shows a comparison of the emission spectra of a distributed feedback (DFB) semiconductor laser and a conventional Fabry–Pérot (FP) semiconductor laser. While a conventional FP semiconductor laser exhibits multiple longitudinal modes, a DFB semiconductor laser operates in a single longitudinal mode. It also achieves a side-mode suppression ratio (SMSR) of 50 dB or higher.
Temperature Dependence of Peak Emission Wavelength
The graph shows a comparison of the temperature dependence of the peak emission wavelength of a DFB semiconductor laser and a conventional FP semiconductor laser. Compared with the FP semiconductor laser, the DFB semiconductor laser exhibits a smaller change in peak emission wavelength with temperature.
1These are tentative values as the product is still under development.
应用示例
- Interferometric Measurement
- Raman Spectroscopy
- Other Measurement and Spectroscopy Applications
- Atomic and Ion Excitation
联系我们
通过定制搭载芯片,可支持多种波长配置。 如需了解产品详情,欢迎通过咨询表单与我们联系。
联系我们